parse_commands.cpp File Reference

#include "cddefines.h"
#include "physconst.h"
#include "optimize.h"
#include "doppvel.h"
#include "stopcalc.h"
#include "abund.h"
#include "geometry.h"
#include "dense.h"
#include "plot.h"
#include "grid.h"
#include "rfield.h"
#include "grainvar.h"
#include "dynamics.h"
#include "magnetic.h"
#include "trace.h"
#include "atmdat.h"
#include "h2.h"
#include "mole.h"
#include "hmi.h"
#include "rt.h"
#include "thermal.h"
#include "opacity.h"
#include "atomfeii.h"
#include "called.h"
#include "wind.h"
#include "hextra.h"
#include "iterations.h"
#include "radius.h"
#include "input.h"
#include "monitor_results.h"
#include "phycon.h"
#include "fudgec.h"
#include "version.h"
#include "conv.h"
#include "parse.h"
#include "cosmology.h"
#include "pressure.h"
#include "parser.h"
#include "dark_matter.h"

Include dependency graph for parse_commands.cpp:

Go to the source code of this file.

Functions
void	ParseAperture (Parser &p)
void	ParseAtom (Parser &p)
void	ParseBremsstrahlung (Parser &p)
void	ParseCExtra (Parser &p)
void	ParseCMBOuter (Parser &p)
void	ParseCosm (Parser &p)
void	ParseCovering (Parser &p)
void	ParseCylinder (Parser &p)
void	ParseDarkMatter (Parser &p)
void	ParseDielectronic (Parser &)
void	ParseDiffuse (Parser &p)
void	ParseDistance (Parser &p)
void	ParseDoubleTau (Parser &)
void	ParseEden (Parser &p)
void	ParseEnergy (Parser &p)
void	ParseFail (Parser &p)
void	ParseFill (Parser &p)
void	ParseF_nuSpecific (Parser &p)
void	ParseForceTemperature (Parser &p)
void	ParseFudge (Parser &p)
void	ParsePGrains (Parser &)
void	ParseGravity (Parser &p)
void	ParseHeLike (Parser &)
void	ParseHelp (Parser &)
void	ParseHExtra (Parser &p)
void	ParseConvHighT (Parser &)
void	ParseHydrogen (Parser &)
void	ParseInitCount (Parser &p)
void	ParseIntensity (Parser &p)
void	ParseIterations (Parser &p)
void	ParseL_nu (Parser &p)
void	ParseLaser (Parser &p)
void	ParseLuminosity (Parser &p)
void	ParseNeutrons (Parser &p)
void	ParseNuF_nu (Parser &p)
void	ParseNuL_nu (Parser &p)
void	ParsePhi (Parser &p)
void	ParseQH (Parser &p)
void	ParseRoberto (Parser &)
void	ParseSpecial (Parser &)
void	ParseTauMin (Parser &p)
void	ParseTitle (Parser &)
void	ParseTolerance (Parser &)
void	ParseVLaw (Parser &p)
void	ParseTurbulence (Parser &p)
void	ParseCommands (void)
void	ParseAbundancesNonSolar (Parser &p)

Function Documentation

ParseAbundancesNonSolar()

void ParseAbundancesNonSolar

(

Parser &

p

)

ParseAbundances parse and read in composition as set by abundances command

Parameters

*chCard
lgDSet

Definition at line 810 of file parse_commands.cpp.

References abund, t_abund::lgAbnSolar, and ParseAbundances().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseAperture()

void ParseAperture

(

Parser &

p

)

Definition at line 819 of file parse_commands.cpp.

References cdEXIT, t_geometry::covaper, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), geometry, t_geometry::iEmissPower, ioQQQ, Parser::lgEOL(), t_geometry::lgSizeSet, Parser::nMatch(), Parser::NoNumb(), and t_geometry::size.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseAtom()

void ParseAtom

(

Parser &

p

)

Definition at line 883 of file parse_commands.cpp.

References atmdat, cdEXIT, t_atmdat::chCloudyChiantiFile, t_atmdat::chStoutFile, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetQuote(), INPUT_LINE_LENGTH, ioQQQ, ipH_LIKE, ipHE_LIKE, t_atmdat::lgChiantiExp, t_atmdat::lgChiantiHybrid, t_atmdat::lgChiantiLevelsSet, t_atmdat::lgChiantiOn, t_atmdat::lgChiantiPrint, Parser::lgEOL(), t_atmdat::lgLamdaOn, t_atmdat::lgStoutHybrid, t_atmdat::lgStoutOn, t_atmdat::lgStoutPrint, t_atmdat::nChiantiMaxLevels, t_atmdat::nChiantiMaxLevelsFe, Parser::nMatch(), Parser::NoNumb(), t_atmdat::nStoutMaxLevels, ParseAtomFeII(), ParseAtomH2(), and ParseAtomISO().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseBremsstrahlung()

void ParseBremsstrahlung

(

Parser &

p

)

Definition at line 1059 of file parse_commands.cpp.

References cdEXIT, t_rfield::chSpType, t_optimize::chVarFmt, t_rfield::cutoff, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_optimize::lgVarOn, LIMSPC, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_rfield::nShape, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, rfield, t_rfield::slope, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseCExtra()

void ParseCExtra

(

Parser &

p

)

Definition at line 1100 of file parse_commands.cpp.

References t_thermal::cextpw, t_thermal::CoolExtra, Parser::FFmtRead(), t_thermal::lgCExtraOn, Parser::lgEOL(), Parser::NoNumb(), and thermal.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseCMBOuter()

void ParseCMBOuter

(

Parser &

p

)

Definition at line 1111 of file parse_commands.cpp.

References cosmology, Parser::FFmtRead(), GetDensity(), INPUT_LINE_LENGTH, Parser::lgEOL(), t_rfield::lgTimeVary, Parser::m_nqh, Parser::nMatch(), ParseCMB(), ParseHDEN(), t_cosmology::redshift_current, t_cosmology::redshift_start, rfield, Parser::set_point(), and Parser::setline().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseCommands()

void ParseCommands

(

void

)

ParseCommands main command line parser, called by Cloudy to decode commands, it then call other routines to parse specific commands

Definition at line 90 of file parse_commands.cpp.

References abund, CloudyCommand::action, called, cdEXIT, t_dense::chDenseLaw, t_rfield::chRSpec, t_StopCalc::col_h2, t_StopCalc::col_h2_nut, t_StopCalc::colnut, t_StopCalc::colpls, COLUMN_INIT, Parser::Command(), Parser::CommandError(), t_thermal::ConstGrainTemp, t_thermal::ConstTemp, conv, t_geometry::covaper, t_geometry::covgeo, cpu, t_hextra::cryden, DEBUG_ENTRY, dense, dense_fabden(), dense_parametric_wind(), dense_tabden(), t_dense::DensityPower, t_radius::depth, Parser::doSetVar(), Parser::echo(), Wind::emdot, EXIT_FAILURE, t_pressure::external_mass, t_geometry::FillFac, t_dense::gas_phase, geometry, Parser::getline(), t_pressure::gravity_symmetry, grid, gv, h2, t_StopCalc::HColStop, hextra, t_cpu::i(), t_geometry::iEmissPower, t_input::init(), InitMonitorResults(), input, Singleton< t_version >::Inst(), ioQQQ, ipHYDROGEN, t_input::iReadWay, Parser::isCommandComment(), Parser::isVar(), t_iterations::iter_malloc, iterations, t_iterations::itermx, Parser::last(), t_abund::lgAbnSolar, t_conv::lgAutoIt, Wind::lgBallistic(), t_rfield::lgBlockHIon, t_opac::lgCaseB, t_iterations::lgConverge_set, GrainVar::lgDColOn, t_rfield::lgDoLineTrans, diatomics::lgEnabled, t_grid::lgGrid, t_rfield::lgIonizReevaluate, t_cpu_i::lgMPI_talk(), t_rfield::lgMustBlockHIon, t_grid::lgNegativeIncrements, t_mole_global::lgNoMole, t_optimize::lgNoVary, t_rfield::lgOpacityFine, t_rfield::lgOpacityReevaluate, t_plotCom::lgPlotON, t_grid::lgSaveXspec, t_input::lgSetNoBuffering, Wind::lgStatic(), t_called::lgTalk, t_trace::lgTrace, t_optimize::lgTrOpt, t_trace::lgTrOvrd, t_optimize::lgVarOn, t_iterations::lim_iter, t_iterations::lim_zone, LIMPAR, LIMSPC, Parser::m_lgDSet, Parser::m_lgEOF, Parser::m_nInitFile, Parser::m_nqh, min(), MIN2, MIN3, mole_global, CloudyCommand::name, t_geometry::nend, t_grid::nGridCommands, Parser::nMatch(), t_optimize::nOptimiz, t_optimize::nparm, t_plotCom::nplot, t_input::nSave, t_rfield::nShape, t_optimize::nTrOpt, opac, optimize, ParseAbsMag(), ParseAbundancesNonSolar(), ParseAge(), ParseAgn(), ParseAperture(), ParseAtom(), ParseBackgrd(), ParseBlackbody(), ParseBremsstrahlung(), ParseCaseB(), ParseCExtra(), ParseCMBOuter(), ParseCompile(), ParseConstant(), ParseConvHighT(), ParseCoronal(), ParseCosm(), ParseCosmicRays(), ParseCosmology(), ParseCovering(), ParseCrashDo(), ParseCylinder(), ParseDarkMatter(), ParseDielectronic(), ParseDiffuse(), ParseDistance(), ParseDLaw(), ParseDont(), ParseDoubleTau(), ParseDrive(), ParseDynaTime(), ParseDynaWind(), ParseEden(), ParseElement(), ParseEnergy(), ParseExtinguish(), ParseF_nuSpecific(), ParseFail(), ParseFill(), ParseFluc(), ParseForceTemperature(), ParseFudge(), ParseGlobule(), ParseGrain(), ParseGravity(), ParseGrid(), ParseHDEN(), ParseHeLike(), ParseHelp(), ParseHExtra(), ParseHydrogen(), ParseIlluminate(), ParseInitCount(), ParseIntensity(), ParseInterp(), ParseIonParI(), ParseIonParX(), ParseIterations(), ParseL_nu(), ParseLaser(), ParseLuminosity(), ParseMagnet(), ParseMap(), ParseMetal(), ParseMonitorResults(), ParseNeutrons(), ParseNorm(), ParseNuF_nu(), ParseNuL_nu(), ParseOptimize(), ParsePGrains(), ParsePhi(), ParsePlot(), ParsePowerlawContinuum(), ParsePrint(), ParseQH(), ParseRadius(), ParseRatio(), ParseRoberto(), ParseSave(), ParseSet(), ParseSpecial(), ParseSphere(), ParseState(), ParseStop(), ParseTable(), ParseTauMin(), ParseTest(), ParseTitle(), ParseTLaw(), ParseTolerance(), ParseTrace(), ParseTurbulence(), ParseVLaw(), phycon, plotCom, pressure, radius, t_radius::Radius, rfield, t_radius::rinner, t_dense::SetGasPhaseDensity(), StopCalc, t_radius::StopThickness, t_StopCalc::tauend, t_phycon::TEMP_STOP_DEFAULT, t_StopCalc::TempLoStopZone, thermal, trace, wind, and Wind::windv0.

Referenced by cloudy(), and grid_do().

ParseConvHighT()

void ParseConvHighT

(

Parser &

)

Definition at line 1725 of file parse_commands.cpp.

References t_thermal::lgTeHigh, and thermal.

Referenced by ParseCommands().

ParseCosm()

void ParseCosm

(

Parser &

p

)

Definition at line 1134 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParseCovering()

void ParseCovering

(

Parser &

p

)

Definition at line 1141 of file parse_commands.cpp.

References cdEXIT, t_geometry::covgeo, t_geometry::covrt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), geometry, ioQQQ, Parser::lgEOL(), and Parser::NoNumb().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseCylinder()

void ParseCylinder

(

Parser &

p

)

Definition at line 1169 of file parse_commands.cpp.

References t_radius::CylindHigh, Parser::FFmtRead(), t_radius::lgCylnOn, Parser::lgEOL(), Parser::NoNumb(), and radius.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseDarkMatter()

void ParseDarkMatter

(

Parser &

p

)

Definition at line 1179 of file parse_commands.cpp.

References cdEXIT, t_optimize::chVarFmt, dark, DEBUG_ENTRY, EXIT_FAILURE, Parser::getNumberCheckAlwaysLog(), Parser::getNumberDefaultAlwaysLog(), input, ioQQQ, t_dark_matter::lgNFW_Set, t_optimize::lgVarOn, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_dark_matter::r_200, t_dark_matter::r_s, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseDielectronic()

void ParseDielectronic

(

Parser &

)

Definition at line 1215 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParseDiffuse()

void ParseDiffuse

(

Parser &

p

)

Definition at line 1223 of file parse_commands.cpp.

References cdEXIT, t_rfield::chDffTrns, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), t_rfield::lgOutOnly, Parser::nMatch(), and rfield.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseDistance()

void ParseDistance

(

Parser &

p

)

Definition at line 1271 of file parse_commands.cpp.

References t_optimize::chVarFmt, t_radius::distance, Parser::FFmtRead(), input, Parser::lgEOL(), t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, PARSEC, radius, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseDoubleTau()

void ParseDoubleTau

(

Parser &

)

Definition at line 1303 of file parse_commands.cpp.

References t_rt::DoubleTau, and rt.

Referenced by ParseCommands().

ParseEden()

void ParseEden

(

Parser &

p

)

Definition at line 1307 of file parse_commands.cpp.

References dense, t_dense::EdenExtra, Parser::FFmtRead(), Parser::lgEOL(), t_phycon::lgPhysOK, Parser::NoNumb(), and phycon.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseEnergy()

void ParseEnergy

(

Parser &

p

)

Definition at line 1317 of file parse_commands.cpp.

References ASSERT, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_radius::lgRadiusKnown, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseF_nuSpecific()

void ParseF_nuSpecific

(

Parser &

p

)

Definition at line 1459 of file parse_commands.cpp.

References ParseF_nu().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseFail()

void ParseFail

(

Parser &

p

)

Definition at line 1384 of file parse_commands.cpp.

References conv, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), t_conv::lgMap, t_conv::LimFail, Parser::nMatch(), and Parser::NoNumb().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseFill()

void ParseFill

(

Parser &

p

)

Definition at line 1409 of file parse_commands.cpp.

References called, t_optimize::chVarFmt, Parser::FFmtRead(), t_geometry::FillFac, t_geometry::filpow, t_geometry::fiscal, geometry, input, ioQQQ, Parser::lgEOL(), t_called::lgTalk, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_optimize::varang, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseForceTemperature()

void ParseForceTemperature

(

Parser &

p

)

Definition at line 1465 of file parse_commands.cpp.

References t_thermal::ConstTemp, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), Parser::nMatch(), Parser::NoNumb(), and thermal.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseFudge()

void ParseFudge

(

Parser &

p

)

Definition at line 1486 of file parse_commands.cpp.

References t_optimize::chVarFmt, Parser::FFmtRead(), t_fudgec::fudgea, fudgec, input, Parser::lgEOL(), t_optimize::lgOptimizeAsLinear, t_optimize::lgVarOn, NFUDGC, t_fudgec::nfudge, Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseGravity()

void ParseGravity

(

Parser &

p

)

Definition at line 1533 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, t_pressure::external_mass, Parser::FFmtRead(), t_pressure::gravity_symmetry, ioQQQ, Parser::lgEOL(), Parser::nMatch(), PARSEC, pressure, and t_pressure::self_mass_factor.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseHeLike()

void ParseHeLike

(

Parser &

)

Definition at line 1588 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParseHelp()

void ParseHelp

(

Parser &

p

)

Definition at line 1594 of file parse_commands.cpp.

References DEBUG_ENTRY, Parser::help(), and ioQQQ.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseHExtra()

void ParseHExtra

(

Parser &

p

)

Definition at line 1599 of file parse_commands.cpp.

References cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), hextra, t_hextra::HextraScaleDensity, t_hextra::HextraSS_M, t_hextra::HextraSSalpha, t_hextra::HextraSSradius, input, ioQQQ, Parser::lgEOL(), t_hextra::lgHextraDensity, t_hextra::lgHextraDepth, t_hextra::lgHextraSS, t_hextra::lgTurbHeatVaryTime, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, SOLAR_MASS, t_hextra::turback, t_hextra::TurbHeat, t_hextra::TurbHeatSave, t_hextra::turrad, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseHydrogen()

void ParseHydrogen

(

Parser &

)

Definition at line 1729 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParseInitCount()

void ParseInitCount

(

Parser &

p

)

Definition at line 1735 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, t_input::init(), input, ioQQQ, t_input::iReadWay, Parser::m_nInitFile, and ParseInit().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseIntensity()

void ParseIntensity

(

Parser &

p

)

Definition at line 1761 of file parse_commands.cpp.

References ASSERT, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_radius::lgRadiusKnown, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, ParseRangeOption(), radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseIterations()

void ParseIterations

(

Parser &

p

)

Definition at line 1820 of file parse_commands.cpp.

References t_conv::autocv, conv, Parser::FFmtRead(), geometry, t_iterations::iter_malloc, iterations, t_iterations::itermx, t_iterations::IterPrnt, t_conv::lgAutoIt, Parser::lgEOL(), MAX2, t_geometry::nend, Parser::nMatch(), radius, REALLOC, and t_radius::StopThickness.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseL_nu()

void ParseL_nu

(

Parser &

p

)

Definition at line 1867 of file parse_commands.cpp.

References ParseF_nu().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseLaser()

void ParseLaser

(

Parser &

p

)

Definition at line 1875 of file parse_commands.cpp.

References cdEXIT, t_rfield::chSpType, t_rfield::cutoff, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), LIMSPC, Parser::NoNumb(), t_rfield::nShape, rfield, and t_rfield::slope.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseLuminosity()

void ParseLuminosity

(

Parser &

p

)

Definition at line 1913 of file parse_commands.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, ParseRangeOption(), t_rfield::range, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseNeutrons()

void ParseNeutrons

(

Parser &

p

)

Definition at line 1976 of file parse_commands.cpp.

References t_hextra::effneu, Parser::FFmtRead(), t_hextra::frcneu, hextra, Parser::lgEOL(), t_hextra::lgNeutrnHeatOn, and Parser::NoNumb().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseNuF_nu()

void ParseNuF_nu

(

Parser &

p

)

Definition at line 2003 of file parse_commands.cpp.

References ParseF_nu().

Referenced by ParseCommands().

Here is the call graph for this function:

ParseNuL_nu()

void ParseNuL_nu

(

Parser &

p

)

Definition at line 2011 of file parse_commands.cpp.

References ParseF_nu().

Referenced by ParseCommands().

Here is the call graph for this function:

ParsePGrains()

void ParsePGrains

(

Parser &

)

Definition at line 1527 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParsePhi()

void ParsePhi

(

Parser &

p

)

Definition at line 2019 of file parse_commands.cpp.

References ASSERT, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_radius::lgRadiusKnown, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, ParseRangeOption(), radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseQH()

void ParseQH

(

Parser &

p

)

Definition at line 2076 of file parse_commands.cpp.

References ASSERT, called, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_called::lgTalk, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, ParseRangeOption(), t_rfield::range, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseRoberto()

void ParseRoberto

(

Parser &

)

Definition at line 2126 of file parse_commands.cpp.

References t_radius::dRadSign, and radius.

Referenced by ParseCommands().

ParseSpecial()

void ParseSpecial

(

Parser &

)

Definition at line 2131 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, and EXIT_FAILURE.

Referenced by ParseCommands().

ParseTauMin()

void ParseTauMin

(

Parser &

p

)

Definition at line 2137 of file parse_commands.cpp.

References Parser::FFmtRead(), Parser::lgEOL(), Parser::NoNumb(), opac, and t_opac::taumin.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseTitle()

void ParseTitle

(

Parser &

p

)

Definition at line 2144 of file parse_commands.cpp.

References t_input::chTitle, Parser::GetQuote(), Parser::getRawTail(), and input.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseTolerance()

void ParseTolerance

(

Parser &

)

Definition at line 2152 of file parse_commands.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, and ioQQQ.

Referenced by ParseCommands().

ParseTurbulence()

void ParseTurbulence

(

Parser &

p

)

Definition at line 2170 of file parse_commands.cpp.

References cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, t_DoppVel::DispScale, DoppVel, EXIT_FAILURE, Parser::FFmtRead(), t_DoppVel::Heiles_Troland_F, input, ioQQQ, Parser::lgEOL(), t_DoppVel::lgTurb_pressure, t_DoppVel::lgTurbEquiMag, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, Parser::PrintLine(), SPEEDLIGHT, t_DoppVel::TurbVel, t_DoppVel::TurbVelZero, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

ParseVLaw()

void ParseVLaw

(

Parser &

p

)

Todo:

2 is there a need to keep this negative?

Definition at line 2159 of file parse_commands.cpp.

References ASSERT, DoppVel, Parser::FFmtRead(), t_DoppVel::lgTurbLawOn, and t_DoppVel::TurbVelLaw.

Referenced by ParseCommands().

Here is the call graph for this function: