#include <stdio.h>
#include <map>

Include dependency graph for parser.h:

Data Structures
struct	CloudyCommand

class	Parser

class	KeyAction< V >

class	UnitConverter

Typedefs
typedef void(*	OptionParser) (Parser &)

Functions
const char *	nWord (const char chKey, const char chCard)

bool	isBoundaryChar (char c)

template<typename V >
KeyAction< V >	MakeKeyAction (const char *keyword, const V &action)

template<typename T , typename V >
bool	parserProcess (Parser &p, T list, unsigned long nlist, V value)

void	ParseCosmicRays (Parser &p)

void	ParseCosmology (Parser &p)

void	ParseAbundancesNonSolar (Parser &p)

void	ParseAbundances (Parser &p)

void	ParseDont (Parser &p)

void	ParseSave (Parser &p)

void	parse_save_line (Parser &p, bool lgLog3, char *chHeader)

void	parse_save_average (Parser &p, long int ipPun, char *chHeader)

void	parse_save_colden (Parser &p, char chHeader[])

void	Parse_Save_Line_RT (Parser &p)

void	ParseAge (Parser &p)

void	ParseAgn (Parser &p)

void	ParseState (Parser &p)

void	ParseBlackbody (Parser &p)

void	ParseCompile (Parser &p)

void	ParseConstant (Parser &p)

void	ParseDLaw (Parser &p)

void	ParseTLaw (Parser &p)

void	ParseDrive (Parser &p)

void	ParseGrain (Parser &p)

void	ParseFluc (Parser &p)

void	ParseHDEN (Parser &p)

void	ParseAtomISO (long ipISO, Parser &p)

void	ParseAtomH2 (Parser &p)

void	ParseGrid (Parser &p)

void	ParseInit (Parser &p)

void	ParseInterp (Parser &p)

void	ParseIonParI (Parser &p)

void	ParseIonParX (Parser &p)

void	ParseIonPar (Parser &p, char chType)

void	ParseNorm (Parser &p)

void	ParseOptimize (Parser &p)

void	ParsePrint (Parser &p)

void	ParseRadius (Parser &p)

void	ParseSet (Parser &p)

void	ParseTable (Parser &p)

void	ParseTrace (Parser &p)

void	ParseExtinguish (Parser &p)

void	ParseIlluminate (Parser &p)

void	ParseCaseB (Parser &p)

void	ParseTest (Parser &p)

void	ParseAbsMag (Parser &p)

void	ParseBackgrd (Parser &p)

void	ParseCoronal (Parser &p)

void	ParseElement (Parser &p)

void	ParseCMB (double z, long int *nqh)

void	ParseF_nu (Parser &p, const char *chType, bool lgNU2)

void	ParseGlobule (Parser &p)

void	ParseRangeOption (Parser &p)

void	ParseMap (Parser &p)

void	ParseMetal (Parser &p)

void	ParsePrtLineSum (Parser &p)

void	ParsePlot (Parser &p)

void	ParsePowerlawContinuum (Parser &p)

void	ParseRatio (Parser &p)

void	ParseSphere (Parser &p)

void	ParseStop (Parser &p)

void	ParseCrashDo (Parser &p)

Typedef Documentation

◆ OptionParser

typedef void(* OptionParser) (Parser &)

Definition at line 21 of file parser.h.

Function Documentation

◆ isBoundaryChar()

bool isBoundaryChar ( char c )

Definition at line 83 of file parser.cpp.

Referenced by Parser::nMatch1(), and nWord().

◆ MakeKeyAction()

template<typename V >

KeyAction< V > MakeKeyAction	(	const char *	keyword,
		const V &	action
	)

inline

Helper template to make it easier to generate KeyActions

Definition at line 251 of file parser.h.

◆ nWord()

const char * nWord	(	const char *	chKey,
		const char *	chCard
	)

nWord determine whether match to a keyword occurs on command line, return value is 0 if no match, and position of match within string if hit

Parameters

*chKey
*chCard

Definition at line 37 of file parser.cpp.

References ASSERT, DEBUG_ENTRY, and isBoundaryChar().

Here is the call graph for this function:

◆ parse_save_average()

void parse_save_average	(	Parser &	p,
		long int	ipPun,
		char *	chHeader
	)

Definition at line 12 of file save_average.cpp.

References ASSERT, cdEXIT, t_save::chAverageSpeciesLabel, t_save::chAverageType, t_elementnames::chElementNameShort, DEBUG_ENTRY, elementnames, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetElem(), Parser::getline(), input, INPUT_LINE_LENGTH, ioQQQ, t_save::ipPnunit, Parser::lgEOL(), Parser::m_lgEOF, t_save::nAverage2ndPar, t_save::nAverageIonList, t_save::nAverageList, nLine, Parser::nMatch(), Parser::NoNumb(), t_input::nRead, save, t_save::SaveAverageFree(), and Parser::strcmp().

Referenced by ParseSave().

Here is the call graph for this function:

◆ parse_save_colden()

void parse_save_colden	(	Parser &	p,
		char	chHeader[]
	)

Definition at line 17 of file save_colden.cpp.

References cdEXIT, chElement, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), Parser::getCommand(), Parser::getline(), INPUT_LINE_LENGTH, ionstage, ioQQQ, Parser::lgEOL(), Parser::m_lgEOF, nColdenEntered, Parser::NoNumb(), NPUNLM, and Parser::strcmp().

Referenced by ParseSave().

Here is the call graph for this function:

◆ parse_save_line()

void parse_save_line	(	Parser &	p,
		bool	lgLog3,
		char *	chHeader
	)

Definition at line 33 of file save_line.cpp.

References cdEXIT, chPLab, DEBUG_ENTRY, EXIT_FAILURE, Parser::getline(), Parser::getLineID(), INPUT_LINE_LENGTH, ioQQQ, lgRelativeIntensity, Parser::m_lgEOF, nLinesEntered, NPUNLM, sprt_wl(), Parser::strcmp(), and wavelength.

Referenced by ParseSave().

Here is the call graph for this function:

◆ Parse_Save_Line_RT()

void Parse_Save_Line_RT ( Parser & p )

Definition at line 291 of file save_line.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), Parser::getline(), ioQQQ, Parser::lgEOL(), lgMustPrintHeader, LIMLINE, line_RT_ipHi, line_RT_ipISO, line_RT_ipLo, line_RT_nelem, line_RT_type, Parser::m_lgEOF, nLine, Parser::nMatch(), and Parser::PrintLine().

Referenced by ParseSave().

Here is the call graph for this function:

◆ ParseAbsMag()

void ParseAbsMag ( Parser & p )

ParseAbsMag parse the absolute magnitude command

Definition at line 9 of file parse_absmag.cpp.

References called, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), t_called::lgTalk, t_rfield::lgTimeVary, LIMSPC, Parser::m_nqh, Parser::nMatch(), t_rfield::range, rfield, and t_rfield::totpow.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseAbundances()

void ParseAbundances ( Parser & p )

Definition at line 14 of file parse_abundances.cpp.

References abund, abund_starburst(), t_abund::aCrab, t_abund::ahii, t_abund::aism, t_abund::anova, t_abund::apn, t_abund::aprim, t_abund::camern, cdEXIT, t_elementnames::chElementName, t_elementnames::chElementSym, GrainVar::clear(), DEBUG_ENTRY, GrainPar::dep, DF_STANDARD, Parser::echo(), elementnames, EXIT_FAILURE, Parser::FFmtRead(), t_abund::GASS10, Parser::getline(), gv, INPUT_LINE_LENGTH, ioQQQ, t_abund::ipSolar, Parser::isComment(), t_abund::lgElmONaCrab, t_abund::lgElmONahii, t_abund::lgElmONaism, t_abund::lgElmONapn, Parser::lgEOL(), GrainPar::lgForbidQHeating, GrainPar::lgGreyGrain, t_phycon::lgPhysOK, GrainPar::lgRequestQHeating, LIMELM, Parser::m_lgDSet, Parser::m_lgEOF, mie_read_opc(), GrainPar::nDustFunc, Parser::nMatch(), t_abund::npSolar, t_abund::OldSolar84, ParseElement(), phycon, Parser::setline(), t_abund::solar, t_abund::SolarSave, and Parser::strcmp().

Referenced by ParseAbundancesNonSolar(), and ParseTest().

Here is the call graph for this function:

◆ ParseAbundancesNonSolar()

void ParseAbundancesNonSolar ( Parser & p )

ParseAbundances parse and read in composition as set by abundances command

Parameters

*chCard
lgDSet

Definition at line 810 of file parse_commands.cpp.

References abund, t_abund::lgAbnSolar, and ParseAbundances().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseAge()

void ParseAge ( Parser & p )

ParseAge - parse the age command

Definition at line 39 of file parse_age.cpp.

References cdEXIT, t_timesc::CloudAgeSet, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), NUMBEROF, Parser::nWord(), parserProcess(), timesc, and Time::TimeUnits.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseAgn()

void ParseAgn ( Parser & p )

ParseAgn parse parameters for the AGN continuum shape command

Parameters

*chCard

Definition at line 10 of file parse_agn.cpp.

References cdEXIT, t_rfield::chSpType, t_rfield::cutoff, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, Parser::lgEOL(), LIMSPC, Parser::nMatch(), t_rfield::nShape, rfield, sexp(), t_rfield::slope, and TE1RYD.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseAtomH2()

void ParseAtomH2 ( Parser & p )

ParseAtomH2 parse information from the rotor command line

Parameters

*chCard

Definition at line 13 of file parse_atom_h2.cpp.

References cdEXIT, diatomics::coll_source, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), t_coll_source::filename, fixit(), h2, diatomics::H2_to_H_limit, hmi, init_genrand(), ioQQQ, diatomics::lgColl_deexec_Calc, diatomics::lgColl_dissoc_coll, diatomics::lgColl_gbar, diatomics::lgEnabled, Parser::lgEOL(), t_hmi::lgH2_Chemistry_BigH2, diatomics::lgH2_grain_deexcitation, diatomics::lgH2_He_ORNL, diatomics::lgH2_NOISE, diatomics::lgH2_NOISECOSMIC, diatomics::lgH2_ORH2_ORNL, diatomics::lgH2_ortho_para_coll_on, diatomics::lgH2_PAH2_ORNL, t_hmi::lgH2_Thermal_BigH2, diatomics::lgLTE, diatomics::lgREAD_DATA, N_ELEC, diatomics::n_elec_states, diatomics::n_trace_final, diatomics::n_trace_full, diatomics::n_trace_iterations, diatomics::n_trace_matrix, Parser::nMatch(), Parser::NoNumb(), diatomics::nTRACE, diatomics::set_numLevelsMatrix(), diatomics::xMeanNoise, and diatomics::xSTDNoise.

Referenced by ParseAtom(), and ParseTest().

Here is the call graph for this function:

◆ ParseAtomISO()

void ParseAtomISO	(	long	ipISO,
		Parser &	p
	)

ParseAtomISO parse the atom XX-like command, to set options for iso sequences

Parameters

ipISO
*chCard

Definition at line 17 of file parse_atom_iso.cpp.

References ASSERT, cdEXIT, t_elementnames::chElementSym, t_optimize::chVarFmt, t_hydro::DampOnFac, DEBUG_ENTRY, elementnames, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetElem(), hydro, init_genrand(), input, ioQQQ, ipCRD, ipCRDW, ipH_LIKE, ipHE_LIKE, ipHYDROGEN, ipLY_A, t_isoCTRL::ipLyaRedist, ipPRD, t_isoCTRL::ipResoRedist, t_isoCTRL::ipSubRedist, iso_ctrl, iso_sp, iso_update_num_levels(), t_isoCTRL::lgColl_excite, t_isoCTRL::lgColl_ionize, t_isoCTRL::lgColl_l_mixing, t_isoCTRL::lgContinuumLoweringEnabled, t_isoCTRL::lgCS_None, t_isoCTRL::lgCS_therm_ave, t_isoCTRL::lgCS_Vriens, t_isoCTRL::lgCS_Vrinceanu, t_isoCTRL::lgDielRecom, Parser::lgEOL(), t_isoCTRL::lgFSM, lgHydroMalloc, t_isoCTRL::lgLTE_levels, t_hydro::lgLymanPumping, t_isoCTRL::lgNoRecombInterp, t_isoCTRL::lgPessimisticErrors, t_phycon::lgPhysOK, t_isoCTRL::lgPrintNumberOfLevels, t_isoCTRL::lgRandErrGen, t_isoCTRL::lgTopoff, t_optimize::lgVarOn, LIMELM, MAX2, MIN2, t_isoCTRL::modelRank, t_iso_sp::n_HighestResolved_max, t_iso_sp::nCollapsed_max, t_isoCTRL::nCS_new, NHYDRO_MAX_LEVEL, t_isoCTRL::nLyman, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, phycon, POW3, rfield, RREC_MAXN, TotalInsanity(), t_optimize::vincr, t_optimize::vparm, and t_hydro::xLymanPumpingScaleFactor.

Referenced by ParseAtom(), and ParseTest().

Here is the call graph for this function:

◆ ParseBackgrd()

void ParseBackgrd ( Parser & p )

ParseBackgrd parse the background continuum command

Definition at line 11 of file parse_backgrd.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_rfield::chSpType, CMB_TEMP, t_rfield::cutoff, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), Parser::getRawTail(), HIONPOT, t_rfield::Illumination, ioQQQ, t_rfield::lgBeamed, t_rfield::lgCMB_set, Parser::lgEOL(), t_radius::lgRadiusKnown, LIMSPC, Parser::m_nqh, Parser::nMatch(), t_rfield::nShape, ParseTable(), PI4, powi(), radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, Parser::set_point(), Parser::setline(), t_rfield::slope, STEFAN_BOLTZ, Illuminate::SYMMETRIC, and t_rfield::totpow.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseBlackbody()

void ParseBlackbody ( Parser & p )

parse the blackbody command

Parameters

*chCard	input command line, already changed to caps
*nqh	counter for which continuum source this is
*ar1	optional area that might be set here

Definition at line 13 of file parse_blackbody.cpp.

References BIGFLOAT, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_rfield::chSpType, t_optimize::chVarFmt, t_rfield::cutoff, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_radius::lgRadiusKnown, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_rfield::nShape, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, set_NaN(), t_rfield::slope, STEFAN_BOLTZ, TE1RYD, TotalInsanity(), t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseCaseB()

void ParseCaseB ( Parser & p )

Definition at line 9 of file parse_caseb.cpp.

References DEBUG_ENTRY, Parser::FFmtRead(), t_opac::lgCaseB, t_opac::lgCaseB_HummerStorey, t_opac::lgCaseB_no_pdest, t_opac::lgCaseB_no_photo, Parser::lgEOL(), Parser::nMatch(), opac, and t_opac::tlamin.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseCMB()

void ParseCMB	(	double	z,
		long int *	nqh
	)

ParseCMB parse parameters from fireball command

Parameters

z
*nqh
*ar1

Definition at line 11 of file parse_CMB.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_rfield::chSpType, CMB_TEMP, t_rfield::cutoff, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, t_rfield::Illumination, ioQQQ, t_rfield::lgBeamed, t_rfield::lgCMB_set, t_radius::lgRadiusKnown, LIMSPC, t_rfield::nShape, radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, t_rfield::slope, STEFAN_BOLTZ, Illuminate::SYMMETRIC, and t_rfield::totpow.

Referenced by ParseCMBOuter().

◆ ParseCompile()

void ParseCompile ( Parser & p )

ParseCompile compile werner or kurucz model atmospheres into cloudy format, by K Volk

Parameters

*chCard

Definition at line 18 of file parse_compile.cpp.

References AtlasCompile(), atmdat_readin(), Badnell_rec_init(), cdEXIT, ContCreateMesh(), ContCreatePointers(), CoStarCompile(), DEBUG_ENTRY, dense, ES_FAILURE, ES_SUCCESS, EXIT_FAILURE, EXIT_SUCCESS, Parser::FFmtRead(), FILENAME_PATH_LENGTH_2, Parser::GetQuote(), GridCompile(), ioQQQ, ipH_LIKE, ipHE_LIKE, iso_ctrl, iso_sp, iso_update_num_levels(), Kurucz79Compile(), t_rfield::lgCompileGauntFF, t_opac::lgCompileOpac, t_isoCTRL::lgCompileRecomb, t_dense::lgElmtOn, Parser::lgEOL(), LIKE_RREC_MAXN, LIMELM, mie_write_opc(), MihalasCompile(), t_iso_sp::n_HighestResolved_max, t_iso_sp::nCollapsed_max, process_counter::nFail, process_counter::nFound, Parser::nMatch(), Parser::nMatchErase(), process_counter::nOK, process_counter::notProcessed, opac, OpacityCreateAll(), RauchCompile(), rfield, RREC_MAXN, SB_NEBULAR, SB_STELLAR, SB_TOTAL, StarburstCompile(), StarburstInitialize(), strstr_s(), TlustyCompile(), WernerCompile(), and WMBASICCompile().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseConstant()

void ParseConstant ( Parser & p )

ParseConstant parse the constant ... command

Definition at line 15 of file parse_constant.cpp.

References BIGFLOAT, BOLTZMANN, cdEXIT, t_dense::chDenseLaw, t_optimize::chVarFmt, t_thermal::ConstGrainTemp, t_thermal::ConstTemp, DEBUG_ENTRY, dense, EVDEGK, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, t_pressure::lgContRadPresOn, t_dense::lgDenseInitConstant, Parser::lgEOL(), t_pressure::lgPres_magnetic_ON, t_pressure::lgPres_radiation_ON, t_pressure::lgPres_ram_ON, t_pressure::lgPressureInitialSpecified, t_dense::lgPressureVaryTime, t_pressure::lgRadPresAbortOK, t_thermal::lgTemperatureConstant, t_thermal::lgTemperatureConstantCommandParsed, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, phycon, t_pressure::PresPowerlaw, pressure, t_pressure::PressureInitialSpecified, t_dense::PressureVaryTimeIndex, t_dense::PressureVaryTimeTimescale, SMALLFLOAT, t_phycon::TEMP_LIMIT_HIGH, t_phycon::TEMP_LIMIT_LOW, TempChange(), thermal, t_optimize::varang, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseCoronal()

void ParseCoronal ( Parser & p )

ParseCoronal parse the cronal equilibrum command

Definition at line 16 of file parse_coronal.cpp.

References atmdat, cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_rfield::chSpType, t_optimize::chVarFmt, t_thermal::ConstTemp, t_rfield::cutoff, DEBUG_ENTRY, dynamics, t_rfield::egamry, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, t_dynamics::lg_coronal_time_init, t_atmdat::lgChiantiLevelsSet, Parser::lgEOL(), t_radius::lgRadiusKnown, t_thermal::lgTemperatureConstant, t_thermal::lgTemperatureConstantCommandParsed, t_dynamics::lgTracePrint, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, t_atmdat::nChiantiCollLevels, t_atmdat::nChiantiCollLevelsFe, t_atmdat::nChiantiMaxLevels, t_atmdat::nChiantiMaxLevelsFe, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_rfield::nShape, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, phycon, radius, t_radius::Radius, t_radius::rdfalt, rfield, t_rfield::slope, t_phycon::TEMP_LIMIT_HIGH, t_phycon::TEMP_LIMIT_LOW, thermal, t_rfield::totpow, t_optimize::varang, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseCosmicRays()

void ParseCosmicRays ( Parser & p )

ParseCosmicRays parse the cosmic rays command

Parameters

*chCard

Definition at line 13 of file parse_cosmic_rays.cpp.

References ASSERT, t_hextra::background_density, t_hextra::background_rate, cdEXIT, t_optimize::chVarFmt, t_ionbal::CosRayIonRate, t_hextra::crpowr, t_hextra::crtemp, t_hextra::cryden, t_hextra::cryden_ov_background, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), hextra, input, ionbal, ioQQQ, t_hextra::lg_CR_B_equipartition, Parser::lgEOL(), t_optimize::lgVarOn, MIN2, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, SMALLFLOAT, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseCosmology()

void ParseCosmology ( Parser & p )

ParseCosmology parse the cosmology command

Parameters

*chCard

Definition at line 12 of file parse_cosmology.cpp.

References cosmology, DEBUG_ENTRY, Parser::FFmtRead(), fixit(), t_cosmology::h, ioQQQ, t_cosmology::lgDo, Parser::nMatch(), t_cosmology::omega_baryon, t_cosmology::omega_k, t_cosmology::omega_lambda, t_cosmology::omega_matter, t_cosmology::omega_rad, and TotalInsanity().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseCrashDo()

void ParseCrashDo ( Parser & p )

ParseCrashDo any of several tests to check that the code can crash

Parameters

*chCard

Definition at line 48 of file parse_crashdo.cpp.

References multi_arr< T, d, ALLOC, lgBC >::alloc(), ar2, ARR_SIZE, ASSERT, cdEXIT, multi_arr< T, d, ALLOC, lgBC >::clear(), DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), ioQQQ, isnan, Parser::lgEOL(), MALLOC, MyIsnan(), Parser::nMatch(), multi_arr< T, d, ALLOC, lgBC >::ptr(), multi_arr< T, d, ALLOC, lgBC >::reserve(), set_NaN(), and ZeroNum.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseDLaw()

void ParseDLaw ( Parser & p )

ParseDLaw parse parameters on the dlaw command so set some density vs depth law

Parameters

*chCard

Definition at line 12 of file parse_dlaw.cpp.

References cdEXIT, t_dense::chDenseLaw, t_optimize::chVarFmt, DEBUG_ENTRY, dense, t_dense::DensityLaw, EXIT_FAILURE, Parser::FFmtRead(), t_dense::fhden, t_dense::frad, t_dense::gas_phase, Parser::getline(), input, ioQQQ, ipHYDROGEN, t_dense::lgDLWDepth, Parser::lgEOL(), t_optimize::lgOptimizeAsLinear, t_optimize::lgVarOn, LIMTABDLAW, Parser::m_lgEOF, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_dense::nvals, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_dense::SetGasPhaseDensity(), Parser::strcmp(), t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseDont()

void ParseDont ( Parser & p )

ParseDont parse the dont command

Definition at line 27 of file parse_dont.cpp.

References atmdat, cdEXIT, t_save::chOutputFile, CoolHeavy, DEBUG_ENTRY, t_rfield::DiffPumpOn, dynamics, EXIT_FAILURE, FeII, fixit(), gv, t_atmdat::HCharHeatOn, hyperfine, Singleton< t_yield >::Inst(), ionbal, ioQQQ, ipH_LIKE, ipHE_LIKE, t_yield::kill_yield(), t_atmdat::lgCollIonOn, t_ionbal::lgCompRecoil, t_rfield::lgComptonOn, t_dynamics::lgCoolHeat, t_atmdat::lgCTOn, GrainVar::lgDColOn, t_rfield::lgDoLineTrans, t_rt::lgElecScatEscape, t_CoolHeavy::lgFreeOn, t_rt::lgFstOn, t_mole_global::lgGrain_mole_deplete, GrainVar::lgGrainElectrons, t_ionbal::lgGrainIonRecom, GrainVar::lgGrainPhysicsOn, t_rfield::lgHeIIOTS, t_rfield::lgInducProcess, t_ionbal::lgInnerShellLine_on, t_rfield::lgIonizReevaluate, t_dynamics::lgISO, t_rfield::lgKillOTSLine, t_rfield::lgKillOutCont, t_rfield::lgKillOutLine, t_pressure::lgLineRadPresOn, t_hyperfine::lgLya_pump_21cm, t_rfield::lgLyaOTS, t_FeII::lgLyaPumpOn, t_dynamics::lgMETALS, t_ionbal::lgNoCota, t_mole_global::lgNoHeavyMole, t_mole_global::lgNoMole, t_rfield::lgOpacityFine, t_rfield::lgOpacityReevaluate, t_opac::lgOpacStatic, t_ionbal::lgPhotoIoniz_On, t_phycon::lgPhysOK, t_thermal::lgPredNextTe, t_prt::lgPrintTime, GrainVar::lgQHeatOn, t_opac::lgScatON, t_secondaries::lgSecOFF, t_rt::lgStarkON, t_opac::lgUseFileOpac, GrainVar::lgWD01, mole_global, Parser::nMatch(), nWindLine, opac, t_opac::otsmin, phycon, pressure, Parser::PrintLine(), prt, rfield, rt, save, secondaries, and thermal.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseDrive()

void ParseDrive ( Parser & p )

ParseDrive parse the drive command - drive calls to various subs

Parameters

*chCard

Definition at line 35 of file parse_drive.cpp.

References abund, abund_starburst(), cdEXIT, DEBUG_ENTRY, dgaunt(), DrvCaseBHS(), DrvContPump(), DrvEscP(), DrvHyas(), e2(), ee1(), EXIT_FAILURE, EXIT_SUCCESS, expn(), FFmtRead(), INPUT_LINE_LENGTH, ioQQQ, ioStdin, t_trace::lgDrv_cdLine, t_trace::lgPtrace, LIMELM, Parser::nMatch(), read_whole_line(), Parser::setline(), sexp(), t_abund::solar, TauDummy, trace, and VoigtH().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseElement()

void ParseElement ( Parser & p )

ParseElement parse options on element command

Definition at line 15 of file parse_element.cpp.

References t_abund::AbTabFac, t_abund::AbTabRad, abund, t_dense::AbundanceLimit, ASSERT, cdEXIT, t_elementnames::chElementName, t_elementnames::chElementNameShort, t_optimize::chVarFmt, DEBUG_ENTRY, dense, elementnames, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetElem(), Parser::getline(), input, t_dense::IonHigh, ioQQQ, ipH_LIKE, ipHE_LIKE, ipHELIUM, ipHYDROGEN, t_abund::ipSolar, iso_sp, t_abund::lgAbnSolar, t_abund::lgAbTaDepth, t_abund::lgAbTaON, t_abund::lgAbunTabl, t_dense::lgElmtOn, Parser::lgEOL(), lgFirst, t_dense::lgSetIoniz, t_optimize::lgVarOn, LIMELM, LIMTABD, Parser::m_lgEOF, t_abund::nAbunTabl, NISO, Parser::nMatch(), t_optimize::nparm, t_abund::npSolar, t_input::nRead, t_iso_sp::numLevels_max, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, Parser::PrintLine(), t_abund::ScaleElement, t_dense::SetIoniz, t_abund::solar, Parser::strcmp(), t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseAbundances(), and ParseCommands().

Here is the call graph for this function:

◆ ParseExtinguish()

void ParseExtinguish ( Parser & p )

Definition at line 9 of file parse_extinguish.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, t_rfield::ExtinguishColumnDensity, t_rfield::ExtinguishLeakage, t_rfield::ExtinguishLowEnergyLimit, Parser::FFmtRead(), ioQQQ, t_rfield::lgBlockHIon, Parser::lgEOL(), Parser::nMatch(), Parser::NoNumb(), and rfield.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseF_nu()

void ParseF_nu	(	Parser &	p,
		const char *	chType,
		bool	lgNU2
	)

ParseF_nu parse intensity command parameters

Parameters

*chCard
*nqh
*ar1
*chType
lgNU2

Definition at line 10 of file parse_f_nu.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), FR1RYD, HIONPOT, ioQQQ, Parser::lgEOL(), t_rfield::lgTimeVary, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, and t_rfield::totpow.

Referenced by ParseF_nuSpecific(), ParseL_nu(), ParseNuF_nu(), and ParseNuL_nu().

Here is the call graph for this function:

◆ ParseFluc()

void ParseFluc ( Parser & p )

ParseFluc parse the fluctuations command

Definition at line 8 of file parse_fluc.cpp.

References ASSERT, cdEXIT, t_dense::cfirst, t_dense::chDenseLaw, t_dense::csecnd, DEBUG_ENTRY, dense, EXIT_FAILURE, Parser::FFmtRead(), t_dense::flcPhase, t_dense::flong, t_dense::gas_phase, ioQQQ, ipHYDROGEN, t_dense::lgDenFlucOn, t_dense::lgDenFlucRadius, Parser::lgEOL(), Parser::nMatch(), and t_dense::SetGasPhaseDensity().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseGlobule()

void ParseGlobule ( Parser & p )

ParseGlobule parse parameters off the globule command

Parameters

*chCard

Definition at line 11 of file parse_globule.cpp.

References cdEXIT, t_dense::chDenseLaw, t_optimize::chVarFmt, DEBUG_ENTRY, dense, EXIT_FAILURE, Parser::FFmtRead(), t_dense::gas_phase, t_radius::glbden, t_radius::glbdst, t_radius::glbpow, t_radius::glbrad, input, ioQQQ, ipHYDROGEN, t_radius::lgDrMnOn, Parser::lgEOL(), t_radius::lgSdrmaxRel, t_optimize::lgVarOn, t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, radius, t_radius::sdrmax, t_dense::SetGasPhaseDensity(), t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseGrain()

void ParseGrain ( Parser & p )

ParseGrain parse parameters on Peter's version of the grains command

Parameters

*chCard
*lgDset

Definition at line 12 of file parse_grain.cpp.

References cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, GrainPar::dep, DF_STANDARD, DF_SUBLIMATION, DF_USER_FUNCTION, EXIT_FAILURE, Parser::FFmtRead(), FILENAME_PATH_LENGTH_2, Parser::GetQuote(), gv, input, ioQQQ, GrainVar::lgDColOn, GrainVar::lgDHetOn, GrainPar::lgForbidQHeating, GrainPar::lgGreyGrain, t_phycon::lgPhysOK, GrainVar::lgReevaluate, GrainPar::lgRequestQHeating, t_optimize::lgVarOn, Parser::m_lgDSet, mie_read_opc(), GrainPar::nDustFunc, Parser::nMatch(), nMatch(), Parser::nMatchErase(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, phycon, TotalInsanity(), t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseGrid()

void ParseGrid ( Parser & p )

ParseGrid parse the grid command

Parameters

*chCard

Definition at line 10 of file parse_grid.cpp.

References ASSERT, cdEXIT, t_optimize::chOptRtn, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), fp_equal(), grid, ioQQQ, Parser::lgEOL(), t_grid::lgGrid, t_grid::lgLinearIncrements, t_grid::lgNegativeIncrements, t_grid::lgStrictRepeat, LIMPAR, max(), MAX2, t_grid::nCycle, nint(), Parser::nMatch(), t_optimize::nparm, t_optimize::nRangeSet, t_grid::numParamValues, optimize, t_grid::paramIncrements, t_grid::paramLimits, and t_optimize::varang.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseHDEN()

void ParseHDEN ( Parser & p )

ParseHDEN parse the HDEN command

Definition at line 11 of file parse_hden.cpp.

References cdEXIT, t_dense::chDenseLaw, t_optimize::chVarFmt, DEBUG_ENTRY, t_dense::den0, dense, t_dense::DensityPower, EXIT_FAILURE, Parser::FFmtRead(), t_dense::gas_phase, input, ioQQQ, ipHYDROGEN, Parser::lgEOL(), t_optimize::lgVarOn, MAX_DENSITY, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_dense::rscale, t_dense::SetGasPhaseDensity(), t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCMBOuter(), ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseIlluminate()

void ParseIlluminate ( Parser & p )

Definition at line 16 of file parse_illuminate.cpp.

References cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, t_geometry::DirectionalCosin, EXIT_FAILURE, Parser::FFmtRead(), Illuminate::FORWARD, geometry, t_rfield::Illumination, input, ioQQQ, t_rfield::lgBeamed, Parser::lgEOL(), t_optimize::lgOptimizeAsLinear, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_rfield::nShape, t_optimize::nvarxt, t_optimize::nvfpnt, t_rfield::OpticalDepthScaleFactor, optimize, PI, RADIAN, Illuminate::REVERSE, rfield, Illuminate::SYMMETRIC, t_optimize::varang, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseInit()

void ParseInit ( Parser & p )

ParseInit parse the init command

Definition at line 9 of file parse_init.cpp.

References AS_LOCAL_DATA, cdEXIT, t_input::chCardSav, DEBUG_ENTRY, EXIT_FAILURE, FILENAME_PATH_LENGTH_2, Parser::GetQuote(), input, ioQQQ, lgInputComment(), t_trace::lgTrace, NKRD, Parser::nMatch(), t_input::nSave, t_input::nSaveIni, open_data(), read_whole_line(), and trace.

Referenced by ParseInitCount().

Here is the call graph for this function:

◆ ParseInterp()

void ParseInterp ( Parser & p )

ParseInterp parse parameters on interpolate command

Parameters

*chCard
*lgEOF

Definition at line 11 of file parse_interp.cpp.

References called, cdEXIT, t_rfield::chSpType, DEBUG_ENTRY, Parser::echo(), t_rfield::egamry, t_rfield::emm, t_rfield::EnerGammaRay, EXIT_FAILURE, EXIT_SUCCESS, Parser::FFmtRead(), FR1RYD, Parser::getline(), input, ioQQQ, t_input::iReadWay, Parser::isComment(), Parser::last(), t_trace::lgConBug, t_rfield::lgContMalloc, Parser::lgEOL(), t_rfield::lgGamrOK, t_rfield::lgHPhtOK, t_rfield::lgMMok, t_called::lgTalk, t_trace::lgTrace, t_rfield::lgXRayOK, LIMSPC, Parser::m_lgEOF, max(), NCELL, t_rfield::ncont, t_input::nRead, t_rfield::nShape, rfield, Parser::strcmp(), t_rfield::tFluxLog, t_rfield::tNu, trace, and t_rfield::tslop.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseIonPar()

void ParseIonPar	(	Parser &	p,
		char	chType
	)

ParseIonPar parse the ionization parameter command

Parameters

*nqh
*chCard
*chType

Definition at line 20 of file parse_ionpar.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_radius::lgRadiusKnown, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, radius, t_radius::Radius, t_rfield::range, t_radius::rdfalt, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseIonParI(), and ParseIonParX().

Here is the call graph for this function:

◆ ParseIonParI()

void ParseIonParI ( Parser & p )

ParseIonParI parse the ionization parameter command (IONI variant)

Parameters

*nqh
*chCard
*chType

Definition at line 11 of file parse_ionpar.cpp.

References ParseIonPar().

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseIonParX()

void ParseIonParX ( Parser & p )

ParseIonParX parse the ionization parameter command (XI variant)

Parameters

*nqh
*chCard
*chType

Definition at line 15 of file parse_ionpar.cpp.

References ParseIonPar().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseMap()

void ParseMap ( Parser & p )

ParseMap parse map command to produce map of heating and cooling

Definition at line 9 of file parse_map.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), hcmap, ioMAP, ioQQQ, Parser::lgEOL(), t_hcmap::MapZone, Parser::nMatch(), and t_hcmap::RangeMap.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseMetal()

void ParseMetal ( Parser & p )

ParseMetal parse parameters on metal command

Definition at line 12 of file parse_metal.cpp.

References abund, called, cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, t_abund::Depletion, t_abund::depset, EXIT_FAILURE, Parser::FFmtRead(), GrainVar::GrainMetal, gv, input, ioQQQ, t_abund::lgAbnSolar, t_abund::lgDepln, Parser::lgEOL(), t_called::lgTalk, t_optimize::lgVarOn, LIMELM, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, Parser::PrintLine(), t_abund::ScaleMetals, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseNorm()

void ParseNorm ( Parser & p )

ParseNorm parse parameters on the normalize command

Parameters

*chCard

Definition at line 10 of file parse_norm.cpp.

References cap4(), cdEXIT, t_input::chCardSav, t_LineSave::chNormLab, DEBUG_ENTRY, t_LineSave::errorwave, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetQuote(), Parser::getWave(), input, INPUT_LINE_LENGTH, ioQQQ, Parser::lgEOL(), t_LineSave::lgNormSet, LineSave, Parser::nMatch(), t_input::nRead, t_LineSave::ScaleNormLine, WavlenErrorGet(), and t_LineSave::WavLNorm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseOptimize()

void ParseOptimize ( Parser & p )

ParseOptimize parse the optimize command

Parameters

*chCard

Definition at line 29 of file parse_optimize.cpp.

References t_PredCont::add(), cdEXIT, chOptimFileName, t_optimize::chOptRtn, t_optimize::ContEner, t_optimize::ContIndex, t_optimize::ContNFnu, t_optimize::ContNFnuErr, cpu, DEBUG_ENTRY, DEFERR, EXIT_FAILURE, Parser::FFmtRead(), GetOptColDen(), GetOptLineInt(), GetOptTemp(), Parser::GetQuote(), t_cpu::i(), Singleton< t_PredCont >::Inst(), ioQQQ, t_optimize::lgDiamInCM, Parser::lgEOL(), t_cpu_i::lgMPISingleRankMode(), t_optimize::lgOptCont, t_optimize::lgOptDiam, t_optimize::lgOptimFlow, t_optimize::lgOptimize, t_optimize::lgOptLum, t_optimize::lgParallel, t_optimize::lgTrOpt, t_cpu_i::nCPU(), t_optimize::nIterOptim, Parser::nMatch(), Parser::NoNumb(), t_optimize::nOptLum, t_optimize::nparm, t_optimize::nRangeSet, t_optimize::nTrOpt, t_optimize::optDiam, t_optimize::optDiamErr, t_optimize::OptGlobalErr, t_optimize::optier, optimize, t_optimize::OptIncrm, t_optimize::optint, Parser::PrintLine(), Parser::StandardEnergyUnit(), Parser::StandardFluxUnit(), t_optimize::useCPU, and t_optimize::varang.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParsePlot()

void ParsePlot ( Parser & p )

ParsePlot parse the plot command

Definition at line 16 of file parse_plot.cpp.

References cdEXIT, t_plotCom::chPType, DEBUG_ENTRY, EXIT_FAILURE, ioQQQ, t_plotCom::lgPlotON, t_plotCom::lgPltTrace, NDPLOT, Parser::nMatch(), t_plotCom::nplot, ParsePlotRangeContin(), ParsePlotRangeOption(), and plotCom.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParsePowerlawContinuum()

void ParsePowerlawContinuum ( Parser & p )

ParsePowerlawContinuum parse the power law continuum command

Definition at line 11 of file parse_powerlawcontinuum.cpp.

References cdEXIT, t_rfield::chSpType, t_optimize::chVarFmt, t_rfield::cutoff, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_optimize::lgVarOn, LIMSPC, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_rfield::nShape, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, rfield, t_rfield::slope, TE1RYD, t_optimize::varang, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParsePrint()

void ParsePrint ( Parser & p )

ParsePrint parse the print command

Parameters

*chCard

Definition at line 116 of file parse_print.cpp.

References called, cdEXIT, t_elementnames::chElementName, cpu, DEBUG_ENTRY, t_rfield::egamry, elementnames, EXIT_FAILURE, Parser::FFmtRead(), Parser::GetElem(), Parser::getWaveOpt(), h2, t_cpu::i(), Singleton< t_version >::Inst(), ionbal, ioQQQ, ipH_LIKE, ipHE_LIKE, ipHELIUM, ipHYDROGEN, iso_sp, t_iterations::iter_malloc, iterations, t_iterations::IterPrnt, Parser::lgEOL(), t_prt::lgFaintOn, t_prt::lgFntSet, t_cpu_i::lgMPI_talk(), t_prt::lgOnlyHead, t_prt::lgOnlyZone, t_prt::lgPrintColumns, t_prt::lgPrintFluxEarth, t_prt::lgPrintHeating, t_prt::lgPrintLineCumulative, t_prt::lgPrnAges, t_prt::lgPrnColl, lgPrnErr, t_prt::lgPrnHeat, t_prt::lgPrnInwd, t_prt::lgPrnIsoCollapsed, t_prt::lgPrnLineCell, t_prt::lgPrnPump, t_prt::lgPrtArry, t_prt::lgPrtCitations, t_prt::lgPrtContIndices, t_prt::lgPrtContIndices_hi_E, t_prt::lgPrtContIndices_lo_E, t_iso_sp::lgPrtDepartCoef, t_prt::lgPrtLastIt, t_iso_sp::lgPrtLevelPops, t_prt::lgPrtLineArray, t_prt::lgPrtLineLog, t_prt::lgPrtMaser, t_prt::lgPrtShort, t_prt::lgPrtStart, t_prt::lgPrtTau, t_ionbal::lgRecom_Badnell_print, t_prt::lgSortLineIntensity, t_prt::lgSortLines, t_prt::lgSortLineWavelength, t_prt::lgSurfaceBrightness, t_prt::lgSurfaceBrightness_SR, t_called::lgTalk, t_called::lgTalkForcedOff, t_called::lgTalkIsOK, LIMELM, MAX2, diatomics::nElecLevelOutput, Parser::nMatch(), Parser::NoNumb(), t_prt::nPrnLineCell, t_prt::nstart, t_prt::nzdump, ParsePrtLineSum(), t_cpu_i::printDataPath(), Parser::PrintLine(), prt, prt_constants(), PrtMacros(), t_prt::PrtTauFnt, rfield, t_prt::TooFaint, VoigtH(), t_prt::wlSort1, and t_prt::wlSort2.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParsePrtLineSum()

void ParsePrtLineSum ( Parser & p )

Definition at line 20 of file prt_linesum.cpp.

References cdEXIT, chSMLab, DEBUG_ENTRY, EXIT_FAILURE, Parser::getCommand(), Parser::getline(), Parser::getWaveOpt(), ioQQQ, ipLine, lgFirst, Parser::m_lgEOF, MALLOC, nlsum, NRDSUM, Parser::strcmp(), and wavelength.

Referenced by ParsePrint().

Here is the call graph for this function:

◆ ParseRadius()

void ParseRadius ( Parser & p )

ParseRadius parse the radius command

Definition at line 13 of file parse_radius.cpp.

References cdEXIT, t_optimize::chVarFmt, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, t_iterations::iter_malloc, iterations, Parser::lgEOL(), t_radius::lgRadiusKnown, t_optimize::lgVarOn, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, PARSEC, radius, t_radius::Radius, t_radius::StopThickness, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseRangeOption()

void ParseRangeOption ( Parser & p )

ParseRangeOption parse the range option on the luminosity command

Definition at line 9 of file parse_rangeoption.cpp.

References cdEXIT, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), HIONPOT, ioQQQ, Parser::lgEOL(), Parser::m_nqh, MAX2, MIN2, Parser::nMatch(), t_rfield::range, rfield, and Parser::set_point().

Referenced by ParseIntensity(), ParseLuminosity(), ParsePhi(), and ParseQH().

Here is the call graph for this function:

◆ ParseRatio()

void ParseRatio ( Parser & p )

ParseRatio parse the ratio command

Definition at line 14 of file parse_ratio.cpp.

References cdEXIT, t_rfield::chRSpec, t_rfield::chSpNorm, t_optimize::chVarFmt, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EXIT_FAILURE, Parser::FFmtRead(), input, ioQQQ, Parser::lgEOL(), t_optimize::lgOptimizeAsLinear, t_rfield::lgTimeVary, t_optimize::lgVarOn, LIMSPC, Parser::m_nqh, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_rfield::range, rfield, t_rfield::totpow, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ parserProcess()

template<typename T , typename V >

bool parserProcess	(	Parser &	p,
		T *	list,
		unsigned long	nlist,
		V *	value
	)

Interate through a list of KeyActions: apply the first which matches and then quit

Definition at line 272 of file parser.h.

References Parser::nWord().

Referenced by ParseAge().

Here is the call graph for this function:

◆ ParseSave()

void ParseSave ( Parser & p )

ParseSave parse the save command

Parameters

*chCard

Definition at line 51 of file parse_save.cpp.

References AS_LOCAL_ONLY, cdEXIT, cdGetLineList(), CHARS_SPECIES, t_save::chConPunEnr, t_elementnames::chElementNameShort, t_elementnames::chElementSym, t_save::chFilenamePrefix, t_save::chGridPrefix, t_save::chHeader, ChkUnits(), t_save::chLineListLabel, t_save::chNONSENSE, t_save::chOpcTyp, t_save::chPunRltType, t_save::chSave, t_save::chSaveArgs, t_save::chSaveSpecies, t_save::chSpeciesDominantRates, t_input::chTitle, t_version::chVersion, DEBUG_ENTRY, t_rfield::egamry, elementnames, t_save::emisfreq, t_rfield::emm, EXIT_FAILURE, t_FeII::fe2ener, t_FeII::fe2thresh, FeII, Parser::FFmtRead(), t_save::FITStype, geometry, Parser::GetElem(), Parser::GetQuote(), grid, gv, h2, diatomics::H2_ParseSave(), hcmap, hd, t_grid::HiEnergy_keV, input, INPUT_LINE_LENGTH, Singleton< t_version >::Inst(), ioMAP, ioQQQ, t_save::ioRecom, ipCARBON, t_save::ipDRout, ipHELIUM, ipHYDROGEN, ipOXYGEN, t_save::ipPnunit, t_save::ipPoint, t_save::ipPunConv, t_save::ipTraceConvergeBase, is_odd(), t_save::lg_separate_iterations, t_save::lgCumulative, t_save::lgDRHash, t_save::lgDROn, t_save::lgDROn_noclobber, t_save::lgDRPLst, t_save::lgEmergent, Parser::lgEOL(), t_save::lgFITS, t_save::lgHashEndIter, t_save::lgioRecom, t_save::lgioRecom_noclobber, t_save::lgLineListRatio, t_save::lgLinEvery, t_save::lgNoClobber, t_grid::lgOutputTypeOn, t_save::lgPunContinuum, t_save::lgPunConv, t_save::lgPunConv_noclobber, t_save::lgPunHeader, t_save::lgPunLstIter, t_save::lgPunPoint, t_save::lgPunPoint_noclobber, GrainVar::lgQHPunLast, t_save::lgQHSaveFile_noclobber, t_save::lgRealSave, t_save::lgSaveEveryZone, t_save::lgSaveGrid_noclobber, t_rfield::lgSaveOpacityFine, t_save::lgSaveToSeparateFiles, t_grid::lgSaveXspec, t_FeII::lgShortFe2, t_save::lgTraceConvergeBase, t_save::lgTraceConvergeBase_noclobber, t_save::lgTraceConvergeBaseHash, LIMELM, LIMPUN, t_save::LinEvery, t_grid::LoEnergy_keV, t_hcmap::MapZone, MAX2, MAX_HEADER_SIZE, MIN2, t_geometry::nend, NFE2LEVN, t_save::nLineList, Parser::nMatch(), nMatch(), Parser::nMatchErase(), Parser::NoNumb(), t_save::nsave, t_save::nSaveEveryZone, NUM_OUTPUT_TYPES, open_data(), t_save::optname, parse_save_average(), parse_save_colden(), parse_save_line(), Parse_Save_Line_RT(), t_grid::pnunit, t_save::punarg, GrainVar::QHSaveFile, t_hcmap::RangeMap, rfield, Energy::Ryd(), save, t_save::SaveLineListFree(), Energy::set(), sprt_wl(), Parser::StandardEnergyUnit(), strchr_s(), TotalInsanity(), WAVNRYD, and t_save::wlLineList.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseSet()

void ParseSet ( Parser & p )

ParseSet parse the set command

Definition at line 44 of file parse_set.cpp.

References t_PredCont::add(), t_dynamics::AdvecLengthInit, atmdat, t_co::C12_C13_isotope_ratio_parsed, cdEXIT, t_save::chFilenamePrefix, t_hmi::chGrainFormPump, t_hmi::chH2_small_model_type, t_save::chHashString, t_hmi::chJura, GrainVar::chPAH_abundance, t_dynamics::chPresMode, t_optimize::chVarFmt, t_atmdat::CIRCData, co, diatomics::coll_source, t_atmdat::collstrDefault, continuum, conv, cpu, t_hydro::D2H_ratio, DEBUG_ENTRY, dense, DEPTH_OFFSET, t_atmdat::DIMA, t_ionbal::DR_mean_scale, t_radius::drChange, dynamics, t_conv::EdenErrorAllowed, t_dense::EdenFraction, t_dense::EdenSet, t_rfield::egamry, t_rfield::emm, t_continuum::EnergyKshell, EXIT_FAILURE, t_FeII::feconwlHi, t_FeII::feconwlLo, FeII, Parser::FFmtRead(), t_coll_source::filename, t_rfield::fine_ener_hi, t_rfield::fine_ener_lo, t_rfield::fine_opac_nelem, t_rfield::fine_opac_nresolv, t_rfield::FluxFaint, t_conv::GasPhaseAbundErrorAllowed, geometry, Parser::GetElem(), Parser::GetQuote(), GrainVar::GrainHeatScaleFactor, t_ionbal::guess_noise, gv, h2, t_hmi::H2_frac_abund_set, hcmap, t_dense::HCorrFac, t_atmdat::HCTAlex, t_conv::HeatCoolRelErrorAllowed, hmi, t_atmdat::HYBRID, hydro, t_cpu::i(), init_genrand(), input, INPUT_LINE_LENGTH, Singleton< t_ADfA >::Inst(), Singleton< t_PredCont >::Inst(), ionbal, t_conv::IonizErrorAllowed, ioQQQ, ipHELIUM, iso_ctrl, t_iterations::iter_malloc, iterations, GrainVar::lgBakesPAH_heat, t_continuum::lgCheckEnergyEveryZone, t_isoCTRL::lgCollStrenThermAver, t_iterations::lgConverge_set, t_secondaries::lgCSetOn, t_prt::lgDiffuseInward, t_prt::lgDiffuseOutward, t_geometry::lgEndDflt, Parser::lgEOL(), t_dynamics::lgEquilibrium, t_mole_global::lgFederman, t_radius::lgFixed, t_save::lgFLUSH, t_atmdat::lgGbarOn, diatomics::lgH2_H_coll_07, diatomics::lgH2_He_ORNL, t_isoCTRL::lgInd2nu_On, t_ionbal::lgInnerShell_Gu06, t_ionbal::lgInnerShell_Kisielius, t_hmi::lgLeiden_Keep_ipMH2s, t_hmi::lgLeidenCRHack, t_mole_global::lgLeidenHack, t_opac::lgNegOpacIO, t_mole_global::lgNeutrals, t_mole_global::lgNonEquilChem, t_NumDeriv::lgNumDeriv, t_phycon::lgPhysOK, t_mole_global::lgProtElim, lgPrtSciNot, t_radius::lgSdrmaxRel, t_radius::lgSdrminRel, t_dynamics::lgSetPresMode, t_radius::lgSMinON, t_prt::lgSourceReflected, t_prt::lgSourceTransmitted, t_mole_global::lgStancil, lgTestCodeEnabled, t_mole_global::lgTreatIsotopes, t_ionbal::lgTrimhiOn, t_conv::lgUpdateCouplings, t_optimize::lgVarOn, t_iterations::lim_iter, t_iterations::lim_zone, LIMELM, t_conv::limPres2Ioniz, LINE_CONT_SHIELD_FEDERMAN, LINE_CONT_SHIELD_FERLAND, LINE_CONT_SHIELD_PESC, LineSave, MAX2, MIN2, mole_global, t_dynamics::n_initial_relax, NCHU, t_save::ncSaveSkip, t_geometry::nend, t_geometry::nEndDflt, t_FeII::nfe2con, nint(), t_rt::nLineContShield, t_hcmap::nMapStep, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_save::nsave, NumDeriv, t_optimize::nvarxt, t_optimize::nvfpnt, opac, optimize, peimbt, PHFIT95, PHFIT96, phycon, t_conv::PressureErrorAllowed, Parser::PrintLine(), prt, radius, t_hmi::rate_h2_form_grains_set, t_save::Resolution, t_save::ResolutionAbs, t_continuum::ResolutionScaleFactor, rfield, rt, save, t_hmi::ScaleJura, t_radius::sdrmax, t_radius::sdrmin, t_radius::sdrmin_rel_depth, secondaries, t_ADfA::set_version(), t_cpu_i::setAssertAbort(), t_secondaries::SetCsupra, Parser::setEOL(), SetNChrgStates(), t_dynamics::ShockDepth, t_dynamics::ShockMach, t_LineSave::sig_figs, SMALLFLOAT, SPEEDLIGHT, Parser::StandardEnergyUnit(), StopCalc, t_hmi::Tad, t_StopCalc::TeFloor, t_phycon::TEMP_LIMIT_HIGH, t_phycon::TEMP_LIMIT_LOW, TotalInsanity(), t_ionbal::trimhi, t_ionbal::trimlo, t_peimbt::tsqden, UNUSED, t_optimize::varang, t_optimize::vincr, t_optimize::vparm, and t_save::WeakHeatCool.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseSphere()

void ParseSphere ( Parser & p )

ParseSphere parse the sphere command

Definition at line 9 of file parse_sphere.cpp.

References t_geometry::covgeo, t_geometry::covrt, DEBUG_ENTRY, Parser::FFmtRead(), geometry, ioQQQ, Parser::lgEOL(), t_opac::lgScatON, t_geometry::lgSphere, t_geometry::lgStatic, t_geometry::lgStaticNoIt, Parser::nMatch(), opac, and t_opac::tlamin.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseState()

void ParseState ( Parser & p )

ParseState save or recover previous state of the code

Parameters

*chCard

Definition at line 10 of file parse_state.cpp.

References AS_LOCAL_ONLY, cdEXIT, t_state::chGetFilename, t_state::chPutFilename, DEBUG_ENTRY, EXIT_FAILURE, Parser::GetQuote(), INPUT_LINE_LENGTH, ioQQQ, t_state::lgGet_state, t_state::lgPut_state, t_state::lgPutAll, t_state::lgState_print, Parser::nMatch(), open_data(), and state.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseStop()

void ParseStop ( Parser & p )

ParseStop parse the stop command

Definition at line 17 of file parse_stop.cpp.

References t_PredCont::add(), t_StopCalc::AV_extended, t_StopCalc::AV_point, cdEXIT, CHARS_SPECIES, t_StopCalc::chSpeciesColumn, t_StopCalc::chStopLabel1, t_StopCalc::chStopLabel2, t_optimize::chVarFmt, t_StopCalc::col_H0_ov_Tspin, t_StopCalc::col_h2, t_StopCalc::col_h2_nut, t_StopCalc::col_monoxco, t_StopCalc::col_species, t_StopCalc::colnut, t_StopCalc::colpls, t_StopCalc::ContIndex, t_StopCalc::ContNFnu, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EVRYD, EXIT_FAILURE, Parser::FFmtRead(), geometry, Parser::GetQuote(), Parser::getWaveOpt(), t_StopCalc::HColStop, input, Singleton< t_PredCont >::Inst(), ioQQQ, t_iterations::iter_malloc, iterations, t_geometry::lgEndDflt, Parser::lgEOL(), t_StopCalc::lgStop21cm, t_StopCalc::lgStopSpeciesColumn, t_optimize::lgVarOn, t_geometry::lgZoneSet, max(), MAX2, MIN2, MXSTPL, t_StopCalc::nEmergent, t_geometry::nend, Parser::nMatch(), Parser::NoNumb(), t_optimize::nparm, t_input::nRead, t_StopCalc::nstpl, t_StopCalc::nTotalIonizStop, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, PARSEC, phycon, Parser::PrintLine(), radius, rfield, SMALLFLOAT, Parser::StandardEnergyUnit(), Parser::StandardFluxUnit(), StopCalc, t_StopCalc::StopDepleteFrac, t_StopCalc::StopElecDensity, t_StopCalc::StopElecFrac, t_StopCalc::StopH2MoleFrac, t_StopCalc::StopHPlusFrac, t_StopCalc::StopLineWl1, t_StopCalc::StopLineWl2, t_radius::StopRadius, t_radius::StopThickness, t_StopCalc::StopVelocity, t_StopCalc::stpint, t_StopCalc::tauend, t_StopCalc::taunu, t_phycon::TEMP_LIMIT_HIGH, t_phycon::TEMP_LIMIT_LOW, t_StopCalc::TempHiStopIteration, t_StopCalc::TempHiStopZone, t_StopCalc::TempLoStopIteration, t_StopCalc::TempLoStopZone, t_optimize::vincr, t_optimize::vparm, and t_StopCalc::xMass.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseTable()

void ParseTable ( Parser & p )

ParseTable parse the table read command

Parameters

*nqh
*chCard
*ar1

Definition at line 340 of file parse_table.cpp.

References AS_LOCAL_DATA_TRY, ASSERT, AtlasInterpolate(), AtmospheresAvail(), BIGFLOAT, cdEXIT, cfle, cflf, chLINE_LIST, t_rfield::chRSpec, t_rfield::chSpNorm, t_rfield::chSpType, t_optimize::chVarFmt, CoStarInterpolate(), DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, EVRYD, EXIT_FAILURE, EXIT_SUCCESS, Parser::FFmtRead(), FILENAME_PATH_LENGTH_2, fnuakn, fnucrb, fnuHM96, fnuism, fnurbn, FR1RYD, Parser::GetQuote(), GridInterpolate(), HIONPOT, t_rfield::Illumination, IM_COSTAR_AGE_MZAMS, IM_COSTAR_MZAMS_AGE, IM_COSTAR_TEFF_LOGG, IM_COSTAR_TEFF_MODID, IM_ILLEGAL_MODE, input, ioQQQ, Kurucz79Interpolate(), t_rfield::lgBeamed, lgCalled, t_trace::lgConBug, t_rfield::lgContMalloc, Parser::lgEOL(), t_rfield::lgMustBlockHIon, t_radius::lgRadiusKnown, t_rfield::lgTimeVary, t_trace::lgTrace, t_optimize::lgVarOn, LIMEXT, LIMSPC, Parser::m_nqh, MDIM, MihalasInterpolate(), NAGN, NCELL, NCFL, t_rfield::ncont, NCRAB, NDRAINE, NHM96, NISM, NKN120, Parser::nMatch(), Parser::nMatchErase(), t_optimize::nparm, t_input::nRead, NRUBIN, t_rfield::nShape, t_rfield::nupper, t_optimize::nvarxt, t_optimize::nvfpnt, open_data(), optimize, PI4, radius, t_radius::Radius, t_rfield::range, RauchInterpolateCOWD(), RauchInterpolateHCa(), RauchInterpolateHelium(), RauchInterpolateHNi(), RauchInterpolateHpHe(), RauchInterpolateHydr(), RauchInterpolatePG1159(), t_radius::rdfalt, read_hm05(), ReadTable(), resetBltin(), rfield, RYDLAM, SDIV(), SMALLFLOAT, Illuminate::SYMMETRIC, t_rfield::tFluxLog, TL_BSTAR, TL_OBSTAR, TL_OSTAR, TlustyInterpolate(), t_rfield::tNu, tnuagn, tnuakn, tnucrb, tnudrn, tnuHM96, tnuism, tnurbn, TotalInsanity(), t_rfield::totpow, trace, tslagn, tsldrn, t_rfield::tslop, t_optimize::varang, t_optimize::vincr, t_optimize::vparm, WernerInterpolate(), WMBASICInterpolate(), and ZeroContin().

Referenced by ParseBackgrd(), ParseCommands(), and ParseTest().

Here is the call graph for this function:

◆ ParseTest()

void ParseTest ( Parser & p )

ParseTest parse the test command

Definition at line 11 of file parse_test.cpp.

References DEBUG_ENTRY, INPUT_LINE_LENGTH, ioQQQ, ipH_LIKE, Parser::nMatch(), ParseAbundances(), ParseAtomFeII(), ParseAtomH2(), ParseAtomISO(), ParseCaseB(), ParseConstant(), ParseCosmicRays(), ParseExtinguish(), ParseHDEN(), ParseIonParI(), ParseMonitorResults(), ParseSet(), ParseStop(), ParseTable(), ParseTrace(), Parser::set_point(), and Parser::setline().

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseTLaw()

void ParseTLaw ( Parser & p )

ParseTLaw parse parameters on the tlaw command to set some temperature vs depth

Parameters

*chCard

Definition at line 13 of file parse_tlaw.cpp.

References cdEXIT, t_dense::chDenseLaw, t_optimize::chVarFmt, DEBUG_ENTRY, dense, t_dense::DensityLaw, EXIT_FAILURE, Parser::FFmtRead(), t_dense::fhden, t_dense::frad, Parser::getline(), input, ioQQQ, t_dense::lgDLWDepth, Parser::lgEOL(), t_thermal::lgTeBD96, t_thermal::lgTemperatureConstant, t_thermal::lgTemperatureConstantCommandParsed, t_thermal::lgTeSN99, t_thermal::lgTLaw, t_optimize::lgVarOn, LIMEXT, LIMTABDLAW, Parser::m_lgEOF, Parser::nMatch(), t_optimize::nparm, t_input::nRead, t_dense::nvals, t_optimize::nvarxt, t_optimize::nvfpnt, optimize, t_thermal::SigmaBD96, Parser::strcmp(), t_thermal::T0BD96, t_thermal::T0SN99, TempChange(), thermal, t_optimize::vincr, and t_optimize::vparm.

Referenced by ParseCommands().

Here is the call graph for this function:

◆ ParseTrace()

void ParseTrace ( Parser & p )

ParseTrace parse the trace command

Definition at line 11 of file parse_trace.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, Parser::FFmtRead(), geometry, Parser::GetElem(), ioQQQ, ipH_LIKE, ipHE_LIKE, t_trace::ipIsoTrace, iterations, t_iterations::IterPrnt, t_trace::lgBug2nu, t_trace::lgCalBug, t_trace::lgCarBug, t_trace::lgComBug, t_trace::lgConBug, t_trace::lgCoolTr, t_trace::lgDrBug, t_trace::lgDustBug, Parser::lgEOL(), t_trace::lgESOURCE, t_trace::lgFeBug, t_trace::lgHBug, t_trace::lgHeatBug, t_trace::lgHeavyBug, t_trace::lgHeBug, t_trace::lgIsoTraceFull, t_trace::lgNeBug, t_trace::lgNeonBug, t_trace::lgOptcBug, t_trace::lgOTSBug, t_trace::lgPointBug, t_trace::lgSecIon, t_trace::lgTr8446, t_trace::lgTrace, t_trace::lgTrace3Bod, t_trace::lgTraceMole, t_trace::lgTrDiff, t_trace::lgTrGant, t_trace::lgTrLevN, t_trace::lgTrLine, t_trace::lgTrOptm, t_trace::lgWind, MAX2, Parser::nMatch(), t_geometry::nprint, t_trace::npsbug, t_trace::nTrConvg, t_trace::nznbug, and trace.

Referenced by ParseCommands(), and ParseTest().

Here is the call graph for this function:

Data Structures

Typedefs

Functions

Typedef Documentation

◆ OptionParser

Function Documentation

◆ isBoundaryChar()

◆ MakeKeyAction()

◆ nWord()

◆ parse_save_average()

◆ parse_save_colden()

◆ parse_save_line()

◆ Parse_Save_Line_RT()

◆ ParseAbsMag()

◆ ParseAbundances()

◆ ParseAbundancesNonSolar()

◆ ParseAge()

◆ ParseAgn()

◆ ParseAtomH2()

◆ ParseAtomISO()

◆ ParseBackgrd()

◆ ParseBlackbody()

◆ ParseCaseB()

◆ ParseCMB()

◆ ParseCompile()

◆ ParseConstant()

◆ ParseCoronal()

◆ ParseCosmicRays()

◆ ParseCosmology()

◆ ParseCrashDo()

◆ ParseDLaw()

◆ ParseDont()

◆ ParseDrive()

◆ ParseElement()

◆ ParseExtinguish()

◆ ParseF_nu()

◆ ParseFluc()

◆ ParseGlobule()

◆ ParseGrain()

◆ ParseGrid()

◆ ParseHDEN()

◆ ParseIlluminate()

◆ ParseInit()

◆ ParseInterp()

◆ ParseIonPar()

◆ ParseIonParI()

◆ ParseIonParX()

◆ ParseMap()

◆ ParseMetal()

◆ ParseNorm()

◆ ParseOptimize()

◆ ParsePlot()

◆ ParsePowerlawContinuum()

◆ ParsePrint()

◆ ParsePrtLineSum()

◆ ParseRadius()

◆ ParseRangeOption()

◆ ParseRatio()

◆ parserProcess()

◆ ParseSave()

◆ ParseSet()

◆ ParseSphere()

◆ ParseState()

◆ ParseStop()

◆ ParseTable()

◆ ParseTest()

◆ ParseTLaw()

◆ ParseTrace()